Before you buy
How to measure your lug width
Lug width is the distance between the lugs on the same side of the case, and it decides which strap or bracelet width will fit the watch.[1][2]
3 min read · 4 steps · 12 sources
- Check the strap you already have
The quickest check is the strap you already own: the lug width is commonly stamped on the inside of the band, and NOMOS suggests measuring the gap on one of your current straps.[3][4] When a strap lists two widths, the first is the width at the watch end (the lug width) and the second is the width at the buckle end. Panerai writes this as, for example, 24/22.0 mm.[3][5]
- Measure the gap between the lugs
A pocket caliper is the tool Fratello recommends for measuring any watch dimension; for spring bars, aBlogtoWatch says to measure the distance between the lugs or check the maker's spec sheet.[6][7]
- Do not confuse it with case size or lug-to-lug
Lug width is a different measurement from lug-to-lug, which is the distance from the tip of the top lugs to the tip of the bottom lugs and indicates how a watch wears.[1][2] Case diameter does not tell you the strap size: Breitling states that the diameter of the watch head has no relation to the size of the strap.[8]
- Check the spring bars fit
Spring bars have three dimensions that matter: length (the lug width), middle diameter (the body) and tip diameter (the part that sits in the lug hole). A tip that is too narrow leaves play and raises the risk of failure.[7]
Why your case size does not tell you
A commonly cited design guideline sets the lug spacing at half the case diameter, but makers depart from it: Rolex moved the 36 mm Explorer from 20 mm to 19 mm lug spacing.[9]
Odd and fractional widths
Odd widths such as 17, 19 and 21 mm exist on current watches and are a regular source of complaints because collectors' strap stocks are mostly in even widths.[9][10]
Examples of 19 mm lug widths cited by Time+Tide include the Speedmaster 'First Omega In Space', the original Speedmaster CK2915 and several Grand Seiko and Longines models.[10]
Lug widths are not always whole millimetres: TAG Heuer publishes a lug width of 20.7 mm for the 39 mm Carrera Glassbox, while Cartier does not publish its lug widths.[10]
Bracelets and end pieces
A bracelet can be wider where it meets the case than the gap between the lugs: on the Autodromo Group B Series 2 the bracelet measures 23 mm at the case while the lug gap is 20 mm.[11]
Ming released a version of its Polymesh bracelet with straight end pieces that can fit any watch with a 20 mm lug width; on the earlier version, its curved spring bars limited use on other watches.[12]
A note on the name
Fratello notes that the term lug width is technically imprecise (it describes a lug, not the gap), and prefers strap width or lug spacing for the gap between the lugs.[9]
FAQ
Is lug width the same as case size?
No. Case diameter is the size of the watch head and has no fixed relation to strap size; lug width is the gap between the lugs where the strap fits.[1][8]
Where can I find the lug width without measuring?
Look on the underside of your current strap, where the width is often stamped, or check the maker's specification sheet.[3][7]
Find your watch's sizeSearch your model to see its lug width and how its strap attaches.
Search my watchSources
- Time+Tide timeandtidewatches.com
- Time+Tide timeandtidewatches.com
- aBlogtoWatch ablogtowatch.com
- NOMOS Glashutte nomos-glashuette.com
- Panerai panerai.com
- Fratello fratellowatches.com
- aBlogtoWatch ablogtowatch.com
- Breitling breitling.com
- Fratello fratellowatches.com
- Time+Tide timeandtidewatches.com
- Worn & Wound wornandwound.com
- Worn & Wound wornandwound.com
Each numbered source was opened and checked by an independent reviewer. We never use strap sellers or retailers as sources.