Dan Henry

Most Dan Henry watches use a 20 mm lug width: 74 of the 155 Dan Henry references with a listed width in our database (48%).

Lug widths at Dan Henry

Dan Henry collections

The story · Since 2015

The Dan Henry story

  1. 2015 Dan Henry says his company was planned in 2015, before he launched the brand.
  2. 2016 Founded by Dan Henry.
  3. 2016 The first Dan Henry model, the 1963 Pilot Chronograph, carries a release date of 20 September 2016 on the maker's page.

FAQ

What lug width do Dan Henry watches use?

20 mm is the most common (48% of Dan Henry references with a listed width), followed by 19 mm and 22 mm.

Do all Dan Henry watches take the same strap size?

No. Dan Henry uses 6 different lug widths across its collections, so check your exact model or reference.

When was Dan Henry founded?

Dan Henry was founded in 2016 by Dan Henry.

Help

What is lug width?

The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.

Measure it in 30 seconds

  1. Take the strap off, or look at the back of it: many straps print their width.
  2. Measure the inside gap between the lugs with a caliper or a millimetre ruler.
  3. Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.

Strap, quick release or system?

Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.