Longines Heritage Diver

Widths differ across this line. Enter or pick your exact reference to get its width.

21 or 22 mm

Verification: Listed in our database

Attachment: spring bars

42 to 43 mm cases · 2007 to 2015

Pick your reference

Filter references by lug width

Indicative information. Check your watch before buying a strap: wristreet.com is not responsible for an incorrect size.

Watch line16 references
22 mm
Illustration drawn to scale: 42 mm case, 22 mm lugs

No photo of the Longines Heritage Diver yet. Do you own one?Share a photo

The story · Since 1968

The story of the Longines Heritage Diver

In 2014 Longines brought back its 1970s divers as a 43 mm cushion steel case with a crown-operated inner bezel and 300 metres of water resistance.

43 mm

Case diameter of the 2014 Heritage Diver models

Read the full storyHide the story
43 mmCase diameter of the 2014 Heritage Diver models
300 m (30 bar)Water resistance at the 2014 launch
38 hoursPower reserve of the three-hand Calibre L633.5

Chapters

  1. 1968 to 1970

    Cushion divers before the reissue

    Longines' Diver's Chronograph ref. 8224 of 1968 used a cushion case and was water resistant to 200m. Around 1970 the ref. 8229-1 was a 42 mm three-register chronograph in a cushion case.

  2. 1970s

    The models behind the name

    The 2014 line reissues two models that Longines designed for divers in the 1970s. Monochrome describes the range as harking back to the diving watches Longines made in that decade.

  3. 2014

    Two reissues at launch

    The three-hand and the chronograph share a 43 mm cushion case, a bidirectional inner flange and a screw-down caseback engraved with a diver. Time and Watches priced the three-hand at US$2,550 and the chronograph at US$3,750.

  4. 2015

    A 1967 chronograph joins

    At Baselworld 2015 Longines added the Heritage Diver 1967, a 42 mm chronograph with an L688.2 column-wheel movement. SJX describes it as modelled on a sixties skin-diver chronograph, ref. 7981.

Moments

In 2014 Longines launched the Heritage Diver as a three-hand and a chronograph, both reissues of 1970s divers.

At Baselworld 2015 Longines debuted the Heritage Diver 1967, a 42 mm diving chronograph inspired by a 1967 piece.

Generations and strap changes

  1. 1970s
    Original 1970s divers

    The 2014 reissues copy the 1970s originals: a cushion-shaped steel case of 43 mm, the same diameter as the origin models, according to WatchPro.

  2. 2015
    Heritage Diver 1967 chronograph

    A 42 mm steel chronograph with an L688.2 column-wheel movement, a 54-hour power reserve and 300 m water resistance, offered on a leather strap, rubber strap or bracelet.

    Available on a leather strap, rubber strap, or bracelet (Professional Watches).

  3. 2014
    Heritage Diver three-hand, L2.795.4.52

    Calibre L633.5 (ETA 2824-2) with a 38-hour power reserve, date at 3 o'clock and an inner flange graduated 0 to 60 that the crown at 2 o'clock turns. Launch price US$2,550.

    Strap options at launch: a black synthetic bracelet with a small diving buckle, or a black rubber bracelet with a diving folding clasp (MasterHorologer).

  4. 2014
    Heritage Diver Chronograph, L2.796.4.52

    Calibre L651.3 (ETA 2894-2) with 42 hours of power reserve, date at 6 o'clock and a 60-to-0 inner flange turned by the crown at 10 o'clock. Launch price US$3,750.

    Strap options at launch: a black synthetic bracelet with a small diving buckle, or a black rubber bracelet with a diving folding clasp (MasterHorologer).

16 Longines Heritage Diver references

Longines Heritage Diver references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.

  • L2.744.4.56.2

    Heritage Diver 1960 LE

    Lug width: 21 mm

    Source: Listed Attachment: Spring bars

    Case size: 42 mmYear: 2007Black dialCase material: Steel

    Attachment
    classic lugs
    Style
    diver
    Movement
    Automatic
    Caseback
    Screw steel
    Production
    2007-2008
    Status
    Listed in our database, not yet verified
  • L2.808.4.52.6

    Heritage Diver 1967

    Lug width: 22 mm

    Source: Listed Attachment: Spring bars

    Case size: 42 mmYear: 2015Black/Red dialCase material: Steel

    Attachment
    classic lugs
    Style
    diver
    Movement
    Automatic
    Caseback
    Screw steel
    Production
    2015, present
    Status
    Listed in our database, not yet verified
  • L2.795.4.52.0

    Heritage Diver

    Lug width: 22 mm

    Source: Listed Attachment: Spring bars

    Case size: 43 mmBlack dialCase material: Stainless steel

    Attachment
    classic lugs
    Status
    Listed in our database, not yet verified
  • L2.795.4.52.2

    Heritage Diver

    Lug width: 22 mm

    Source: Listed Attachment: Spring bars

    Case size: 43 mmBlack dialCase material: Stainless steel

    Attachment
    classic lugs
    Status
    Listed in our database, not yet verified
  • L2.795.4.52.9

    Heritage Diver

    Lug width: 22 mm

    Source: Listed Attachment: Spring bars

    Case size: 43 mmBlack dialCase material: Stainless steel

    Attachment
    classic lugs
    Status
    Listed in our database, not yet verified
  • L2.796.4.52.0

    Heritage Diver

    Lug width: 22 mm

    Source: Listed Attachment: Spring bars

    Case size: 43 mmBlack dialCase material: Stainless steel

    Attachment
    classic lugs
    Status
    Listed in our database, not yet verified
  • L2.796.4.52.2

    Heritage Diver

    Lug width: 22 mm

    Source: Listed Attachment: Spring bars

    Case size: 43 mmBlack dialCase material: Stainless steel

    Attachment
    classic lugs
    Status
    Listed in our database, not yet verified
  • L2.796.4.52.9

    Heritage Diver

    Lug width: 22 mm

    Source: Listed Attachment: Spring bars

    Case size: 43 mmBlack dialCase material: Stainless steel

    Attachment
    classic lugs
    Status
    Listed in our database, not yet verified
  • L2.808.4.52.9

    Heritage Diver

    Lug width: 22 mm

    Source: Listed Attachment: Spring bars

    Case size: 42 mmBlack dialCase material: Stainless steel

    Attachment
    classic lugs
    Status
    Listed in our database, not yet verified
  • L3.674.4.50.2

    Heritage Diver

    Lug width: 22 mm

    Source: Listed Attachment: Spring bars

    Case size: 42 mmBlack dialCase material: Stainless steel

    Attachment
    classic lugs
    Status
    Listed in our database, not yet verified
  • L3.674.4.50.9

    Heritage Diver

    Lug width: 22 mm

    Source: Listed Attachment: Spring bars

    Case size: 42 mmBlack dialCase material: Stainless steel

    Attachment
    classic lugs
    Status
    Listed in our database, not yet verified
  • L3.674.4.56.0

    Heritage Diver

    Lug width: 22 mm

    Source: Listed Attachment: Spring bars

    Case size: 42 mmBlack dialCase material: Stainless steel

    Attachment
    classic lugs
    Status
    Listed in our database, not yet verified
  • L3.674.4.56.2

    Heritage Diver

    Lug width: 22 mm

    Source: Listed Attachment: Spring bars

    Case size: 42 mmBlack dialCase material: Stainless steel

    Attachment
    classic lugs
    Status
    Listed in our database, not yet verified
  • L3.674.4.56.3

    Heritage Diver

    Lug width: 22 mm

    Source: Listed Attachment: Spring bars

    Case size: 42 mmBlack dialCase material: Stainless steel

    Attachment
    classic lugs
    Status
    Listed in our database, not yet verified
  • L3.674.4.56.4

    Heritage Diver

    Lug width: 22 mm

    Source: Listed Attachment: Spring bars

    Case size: 42 mmBlack dialCase material: Stainless steel

    Attachment
    classic lugs
    Status
    Listed in our database, not yet verified
  • L3.774.4.50.2

    Heritage Diver

    Lug width: 22 mm

    Source: Listed Attachment: Spring bars

    Case size: 42 mmBlack dialCase material: Stainless steel

    Attachment
    classic lugs
    Status
    Listed in our database, not yet verified

Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.

FAQ

What lug width does the Longines Heritage Diver use?

Longines Heritage Diver references use 21 mm or 22 mm depending on the reference and case size, so check yours in the list below. The most common is 22 mm (15 of 16 references with a known width). These widths are listed in our database; the maker check is in progress.

Do all Longines Heritage Diver references take the same strap?

No. 2 different lug widths appear across the line, often by case size or generation. Check the reference engraved on the case back or between the lugs.

How water resistant is the Heritage Diver?

The 2014 launch press gave 300 metres, which Esquire Middle East describes as water-resistance to 30 bar (300 metres).

Which movements are inside the Heritage Diver?

The three-hand model uses Calibre L633.5 (ETA 2824-2) with 38 hours of power reserve. The chronograph uses Calibre L651.3 (ETA 2894-2) with 42 hours.

What straps does the Heritage Diver come with?

At launch Longines supplied a black synthetic strap with the visual texture of canvas and a black rubber strap, according to aBlogtoWatch.

Other Longines collections

Help

What is lug width?

The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.

Measure it in 30 seconds

  1. Take the strap off, or look at the back of it: many straps print their width.
  2. Measure the inside gap between the lugs with a caliper or a millimetre ruler.
  3. Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.

Strap, quick release or system?

Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.