Omega Railmaster Co-Axial

Every reference with a known width takes the same strap size. Your reference is engraved on the case back or between the lugs at 6 o'clock.

20 mm

Verification: Listed in our database

Attachment: spring bars

39 mm case

Indicative information. Check your watch before buying a strap: wristreet.com is not responsible for an incorrect size.

Watch line1 references
20 mm
Illustration drawn to scale: 39 mm case, 20 mm lugs

No photo of the Omega Railmaster Co-Axial yet. Do you own one?Share a photo

Lug widths across the line

The Omega Railmaster Co-Axial takes a 20 mm strap: all 1 references with a known width use 20 mm.

Filter references by lug width

The story · Since 1957

The story of the Omega Railmaster Co-Axial

Omega built the first Railmaster in 1957 to guarantee reliable precision near rail lines, then dropped it after six years. The name came back in 2003 on an Aqua Terra case, and again in 2025 in a 38 mm model.

15,000 gauss

Magnetic field resistance Omega gives for the 2025 Calibre 8806 models

Read the full storyHide the story
15,000 gaussMagnetic field resistance Omega gives for the 2025 Calibre 8806 models
6 yearsProduction run of the original Railmaster, as Swisswatches Magazine states it
15 timesHow much more resistant Omega says the 2025 movement is than the original

Chapters

  1. 1957 to 1963

    Built against magnetic fields

    Omega launched the Railmaster CK2914 in 1957 as part of its professional trilogy. An inner case of soft iron protected the hand-wound calibre 284 from magnetic fields up to 1,000 gauss. The watch was discontinued after only six years in production.

  2. 1963 to 2003

    Nearly four decades out of the catalogue

    The name had been absent from Omega's portfolio for nearly four decades. Swisswatches Magazine says the Railmaster was intended to rival the Rolex Milgauss.

  3. 2003 to 2017

    The Railmaster moves into the Aqua Terra case

    Omega revived the name in 2003 with a case from the Aqua Terra line and a Co-Axial movement, calibre 2403. Omega says the symmetrical cases and linked bracelets have followed the Aqua Terra style for all Railmaster models since 2003. Swisswatches Magazine lists a second reissue in 2017.

  4. 2024 to 2025

    A television role and a return in steel

    British GQ reported in November 2024 that Eddie Redmayne wore a Railmaster as the Jackal in The Day of the Jackal. In May 2025 Omega launched two Railmaster models in stainless steel, with grey and beige dials, each powered by a Master Chronometer movement.

Worn by

Eddie RedmayneScreen2024

Plays the Jackal in The Day of the Jackal (Sky series, 2024). British GQ says he wears a Seamaster Railmaster with a 40mm case and black fabric strap on screen. This is a role, not a stated personal ownership.

Cillian MurphyScreen2023

Photographed in 2023 during the Oppenheimer promotion wearing an Omega Railmaster. SwissWatchExpo names reference 2504.52.00 (36mm), citing a GQ France photo. Time and Tide calls it 'his personal Railmaster' but names no reference, so ownership is not recorded here. The reference is contested (see conflicts).

Moments

2024. Costume designer Natalie Humphries told British GQ the Seamaster Railmaster 'felt like the perfect expression of the Jackal'. The reference is not named. This is a role in a series, not personal ownership.

Generations and strap changes

  1. 2025
    Grey and beige 38 mm models

    Two 38 mm models in stainless steel with black-gradient dials. The grey model has centre seconds with Calibre 8806. The beige model has a small seconds sub-dial with Calibre 8804. Omega says Calibre 8806 resists magnetism up to 15,000 gauss.

    [object Object]

  2. 2017
    Second reissue

    Swisswatches Magazine lists a reissue in 2017 alongside the 2003 revival. The source gives no reference or specification for it.

  3. 1957
    Ref. CK2914

    The original Railmaster, with a hand-wound calibre 284 inside a double case. Omega says the inner case of soft iron resisted fields up to 1,000 gauss.

1 Omega Railmaster Co-Axial references

Omega Railmaster Co-Axial references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.

  • 2803.52.37

    Railmaster Co-Axial

    Lug width: 20 mm

    Source: Listed Attachment: Spring bars

    Case size: 39 mmBlack dialCase material: Steel

    Attachment
    classic lugs
    Movement
    Automatic
    Caseback
    Screw-down steel
    Production
    2003-2012
    Status
    Listed in our database, not yet verified

Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.

FAQ

What lug width does the Omega Railmaster Co-Axial use?

The Omega Railmaster Co-Axial takes a 20 mm strap: all 1 references with a known width use 20 mm. These widths are listed in our database; the maker check is in progress.

What lug width does the Railmaster use?

Omega does not state a lug width on the Railmaster page I read. WatchBase lists 20.00 mm for ref. 2803.52.37, a 39.2 mm Railmaster in the Aqua Terra case. WatchBase counts only as a second source, so treat 20 mm as unconfirmed by the maker.

What straps come with the 2025 Railmaster?

The grey model comes on a stainless steel bracelet or a black leather strap. The beige model comes on a steel bracelet or a golden brown Novonappa leather strap.

How does the 2025 Railmaster bracelet differ from the Aqua Terra one?

Time and Tide says the Railmaster bracelet has more compact, rounded links and a 2mm adjustment in its butterfly clasp. Its case has brushed flanks, where the Aqua Terra has fully polished ones.

Is the 2025 Railmaster anti-magnetic?

Omega says the Co-Axial Master Chronometer Calibre 8806 resists magnetism up to 15,000 gauss, against 1,000 gauss for the 1957 original.

Other Omega collections

Help

What is lug width?

The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.

Measure it in 30 seconds

  1. Take the strap off, or look at the back of it: many straps print their width.
  2. Measure the inside gap between the lugs with a caliper or a millimetre ruler.
  3. Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.

Strap, quick release or system?

Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.