Omega Seamaster 200M

Every reference with a known width takes the same strap size. Your reference is engraved on the case back or between the lugs at 6 o'clock.

20 mm

Verification: Listed in our database

Attachment: spring bars

41 mm case

Indicative information. Check your watch before buying a strap: wristreet.com is not responsible for an incorrect size.

Watch line2 references
20 mm
Illustration drawn to scale: 41 mm case, 20 mm lugs

No photo of the Omega Seamaster 200M yet. Do you own one?Share a photo

Lug widths across the line

The Omega Seamaster 200M takes a 20 mm strap: all 2 references with a known width use 20 mm.

Filter references by lug width

The story · Since 1973

The story of the Omega Seamaster 200M

In 1973 Omega built an angular 200 metre diver that the French hydrographic service ordered in batches. Fifteen years later the 200M came back with an integrated bracelet, and it never took a strap.

200 m

Water resistance of the 1988 Seamaster Professional 200M, as stated by Omega (20 bar)

Read the full storyHide the story
200 mWater resistance of the 1988 Seamaster Professional 200M, as stated by Omega (20 bar)
1973Year ref. 166.0177 debuted at Baselworld

Chapters

  1. 1973

    An angular diver from Omega

    Omega's Seamaster 200, reference 166.0177, debuted at Baselworld in 1973 with calibre 1012 and a 200 metre depth rating printed on the black dial. Its case was made of single pieces of Swedish steel by Piquerez, and it was one of the last angular divers in the Seamaster family.

  2. Late 1970s

    Chosen by the French navy

    The French hydrographic service SHOM asked Omega for the model, and a production batch was delivered to it engraved with the letters SHOM on the caseback. The nickname stuck, and the French Marine Nationale later adopted the watch with the engraving MN 79.

  3. 1988 to 1995

    The 200M returns on a bracelet

    Omega introduced the Seamaster 200M in 1988 in quartz and automatic versions. The quartz used calibre 1438 or 1441, and the full-size case measured 38.5 mm across with a 200 metre rating. The steel and gold bracelet was integrated into the case, with a wetsuit extension and a safety clasp.

Moments

The French hydrographic service SHOM ordered a production batch directly from Omega, and the Marine Nationale later took the watch into service with an engraving dated 79 on the caseback. The year of the SHOM order is given as 1978 in one Omega page and as 1979 in two others, so no year is set here.

Generations and strap changes

  1. 1988
    Seamaster Professional 200M (Pre-Bond)

    Quartz and automatic versions with the integrated steel and gold bracelet. The Omega vintage page for DB 396.1041 gives a 38.5 mm diameter and a 200 metre rating.

    Integrated steel/gold bracelet of ref. 1455/452 (Omega vintage page). Fratello (2021) says the models were only available on an integrated bracelet, so no strap fitting is documented.

  2. 1973
    Ref. 166.0177 (SHOM)

    Angular steel case with calibre 1012 and a 200 metre rating. Sold on an Omega mesh link bracelet in the auction record below.

    Bracelet only in the sources read: Omega mesh link bracelet with signed snap close clasp (Bonhams lot 146, 2013). No lug width stated.

2 Omega Seamaster 200M references

Omega Seamaster 200M references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.

  • 2254.50.00

    Seamaster 200M Modern (Pre-Bond successor)

    Lug width: 20 mm

    Source: Listed Attachment: Spring bars

    Case size: 41 mmBlack dialCase material: Steel

    Attachment
    classic lugs / spring bars
    Movement
    Automatic
    Caseback
    Screw-down steel
    Production
    2000-2008
    Status
    Listed in our database, not yet verified
  • 2064.50.00

    Seamaster 200M Quartz

    Lug width: 20 mm

    Source: Listed Attachment: Spring bars

    Case size: 41 mmBlack dialCase material: Steel

    Attachment
    classic lugs
    Movement
    Quartz
    Caseback
    Screw-down steel
    Production
    2000-2008
    Status
    Listed in our database, not yet verified

Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.

FAQ

What lug width does the Omega Seamaster 200M use?

The Omega Seamaster 200M takes a 20 mm strap: all 2 references with a known width use 20 mm. These widths are listed in our database; the maker check is in progress.

Can I fit a leather or NATO strap to a Seamaster 200M Pre-Bond?

The sources read do not show a strap fitting. Fratello says the Pre-Bond models were only available on an integrated bracelet with a wetsuit extension and safety lock, and Omega's vintage page lists the bracelet as integrated steel and gold.

Which bracelet did the 1988 Seamaster 200M have?

Omega's vintage page for DB 396.1041 gives an integrated steel and gold bracelet of reference 1455/452.

Is there a lug width for the Seamaster 200M?

No lug width is stated in the sources read, because the bracelet is integrated into the case. Check the bracelet and the case, not a strap width, when buying.

Other Omega collections

Help

What is lug width?

The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.

Measure it in 30 seconds

  1. Take the strap off, or look at the back of it: many straps print their width.
  2. Measure the inside gap between the lugs with a caliper or a millimetre ruler.
  3. Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.

Strap, quick release or system?

Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.