Omega Seamaster PloProf

Every reference with a known width takes the same strap size. Your reference is engraved on the case back or between the lugs at 6 o'clock.

24 mm

Verification: Verified by the maker for ref. 227.32.55.21.03.001

Attachment: spring bars or to verify, depending on the reference

55 mm case

Indicative information. Check your watch before buying a strap: wristreet.com is not responsible for an incorrect size.

Watch line5 references
24 mm
Illustration drawn to scale: 55 mm case, 24 mm lugs

No photo of the Omega Seamaster PloProf yet. Do you own one?Share a photo

Lug widths across the line

The Omega Seamaster PloProf takes a 24 mm strap: all 4 references with a known width use 24 mm.

Filter references by lug width

The story · Since 1968

The story of the Omega Seamaster PloProf

Omega's answer to helium was to keep it out: the 1970 Ploprof had a one-piece case, a crown sunk at 9 o'clock under a locking nut and a bezel that turns only while a red pusher is pressed. In COMEX's Janus operation of 1970, three professional divers wore it four hours a day for eight days.

1200 m

water resistance of every Ploprof since the 2009 relaunch, twice the original's 600 m

Read the full storyHide the story
1200 mwater resistance of every Ploprof since the 2009 relaunch, twice the original's 600 m
CHF 131,250paid at Antiquorum in 2020 for a Cousteau diver's prototype estimated at CHF 20,000 to 40,000
282 g to 173 gapproximate weight of the steel 2009 Ploprof 1200M, then of the titanium 227.90 version

Chapters

  1. 1968 to 1970

    Two prototypes for saturation divers

    As saturation diving moved from experiment to industry, Omega began working with the French diving firm COMEX in 1968. By then it had built two families of prototypes to the same specification, coded internally Ploprof 0 and Ploprof 1. Christie's describes a circa 1969 prototype on calibre 1000 that the Omega archives say was meant for testing by professional divers.

  2. 2009 to 2014

    Ploprof 1200M in steel

    Omega relaunched the line in 2009 as the Ploprof 1200M, water resistant to 1200 metres and driven by the Co-Axial calibre 8500. The steel case measures 55 x 48 mm and 17.50 mm thick, with a date at 4:30, a sapphire bezel ring and a Sharkproof mesh bracelet or a black or orange rubber strap. WatchTime notes one departure from 1970: the new case has a separate caseback.

  3. 2015 to 2022

    Titanium and Master Chronometer

    At Baselworld 2015 Omega moved the Ploprof to a titanium case and titanium mesh bracelet, with a ceramic bezel ring, a sapphire caseback and the METAS-tested calibre 8912. The date disappeared, but the hour hand can still be jumped to a new time zone. The titanium 227.90 references weigh about 173 g against 282 g for the steel 2009 model.

  4. 2023 to today

    Summer Blue, original proportions

    For the Seamaster's 75th anniversary in 2023, the Ploprof came back in O-MEGASTEEL with a Summer Blue gradient dial. Time and Tide reports the case returned to the 1970s dimensions, 55 mm wide and 45 mm lug to lug instead of 48 mm, and to a monobloc construction. Omega lists it at 15.50 mm thick on a blue rubber strap.

Worn by

Gianni AgnelliBusiness

The Fiat chairman wore an Omega Seamaster Ploprof buckled over his shirt cuff, his signature style; Watchonista adds that he wore his 600 m Seamaster Professional Ploprof for skiing rather than diving.

Christian BonniciExploration1971

Diver of the Cousteau team; his prototype Ploprof no. 4-100, delivered in July 1971, came with a life book logging his test dives until February 1972.

Moments

2021. Antiquorum sold a Ploprof prototype T 2 in titanium for CHF 43,750. According to a letter from former Omega Museum director Marco Richon, fewer than a dozen titanium cases were ordered from the case maker Schmitz Freres in the early 1970s, and the cost meant the idea was dropped.

2020. Antiquorum sold prototype no. 4-100, the first of batch 4 given to the Cousteau team for testing, for CHF 131,250 against an estimate of CHF 20,000 to 40,000. Its dive log notes complaints such as a dial hard to read at 100 m, and the lot essay cites a screen capture from the film Recco, Le Corailleur, shot by the Cousteau team in summer 1971, showing the prototype in its first test.

2017. Christie's sold a 1972 Seamaster 600 that was reportedly owned and used by Jacques Cousteau, then sold to the diving contractor Andre Galerne, for USD 6,250. The Omega archives record it as made on May 10, 1972 and delivered to SSIH in France as a special budget diving watch. The Cousteau ownership is a consignor's story that Christie's says the archives seem to support.

2015. At Baselworld 2015 Omega showed a titanium Ploprof 1200M Co-Axial Master Chronometer whose case and ceramic bezel were set with 40 carats of diamonds, valued at about $760,000.

1970. During COMEX's Janus operation, three professional divers wore the Seamaster 600 for four hours a day over eight days. Christie's links the watch to the world record for underwater exploration set at 253 metres in the Gulf of Ajaccio.

Christie's writes that the American diving research centre Ocean Systems Inc. of Tarrytown, New York, analysed the watch and concluded that, in proportion, it was more resistant than a submarine.

Generations and strap changes

  1. 2023
    Ref. 227.32.55.21.03.001

    Summer Blue Ploprof in O-MEGASTEEL with a sapphire bezel ring, 55 x 45 mm, 15.50 mm thick, 182 g.

    Case size change: lug to lug drops from 48 mm to 45 mm, while Omega keeps 24 mm between lugs; supplied on a blue rubber strap with a steel pin buckle.

  2. 2016
    Ref. 227.90.55.21.99.002

    Titanium version with an orange ceramic bezel, reviewed by aBlogtoWatch at $13,800.

    aBlogtoWatch: the clasp sets to 17 positions for 22 mm of extra reach, plus a folding 26 mm diver's extension.

  3. 2015
    Ref. 227.90.55.21.01.001

    Titanium Ploprof 1200M Co-Axial Master Chronometer on calibre 8912, black ceramic bezel ring, 18.26 mm thick.

    Delivered on a grade 2 titanium Sharkproof mesh bracelet with an extra black rubber strap in the box.

  4. 2009
    Ref. 224.30.55.21.01.001

    Ref. 224.30.55.21.01.001: Steel Ploprof 1200M on calibre 8500, 55 x 48 mm, 17.50 mm thick, 282 g on its bracelet.

    Omega's product page lists 24 mm between lugs.

  5. 1969
    Prototype ref. ST 166.077

    Pre-series watch on calibre 1000 with a 55 mm wide monobloc case, described by the Omega archives as a prototype for testing by professional divers.

5 Omega Seamaster PloProf references

Omega Seamaster PloProf references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.

  • 166.077

    Seamaster PloProf 600

    Also known as: Ploprof

    Lug width: Width not listed yet

    Source: Listed

    Case size: 55 mmBlack dialCase material: Steel

    Attachment
    classic lugs
    Movement
    Automatic
    Caseback
    Screw-down steel
    Production
    1970-1979
    Status
    Listed in our database, not yet verified
  • 227.32.55.21.03.001

    Seamaster PloProf 1200M 45 mm - Blue on Strap

    Lug width: 24 mm

    Source: Verified, maker Attachment: Spring bars

    Case size: 55 mmBlue dialCase material: O-MEGASTEEL

    Case thickness
    15.5 mm unconfirmed
    Attachment
    classic lugs
  • 227.90.55.21.01.001

    Seamaster PloProf 1200M Titanium

    Lug width: 24 mm

    Source: Listed Attachment: To verify

    Case size: 55 mmBlack dialCase material: Titanium

    Attachment
    lugless
    Movement
    Automatic
    Caseback
    Screw-down titanium
    Production
    2016, present
    Status
    Listed in our database, not yet verified
  • 227.90.55.21.04.001

    Seamaster PloProf 1200M Titanium

    Lug width: 24 mm

    Source: Listed Attachment: Spring bars

    Case size: 55 mmWhite dialCase material: Titanium

    Attachment
    classic lugs / spring bars
    Movement
    Automatic
    Caseback
    Screw-down titanium
    Production
    2016, present
    Status
    Listed in our database, not yet verified
  • 224.30.55.21.01.001

    Seamaster PloProf Co-Axial 1200M

    Lug width: 24 mm

    Source: Listed Attachment: To verify

    Case size: 55 mmBlack dialCase material: Steel

    Attachment
    lugless
    Movement
    Automatic
    Caseback
    Screw-down steel
    Production
    2009-2021
    Status
    Listed in our database, not yet verified

Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.

Unconfirmed: reported by an aggregator, not yet checked against the maker.

FAQ

What lug width does the Omega Seamaster PloProf use?

The Omega Seamaster PloProf takes a 24 mm strap: all 4 references with a known width use 24 mm. The Omega Seamaster PloProf ref. 227.32.55.21.03.001 takes 24 mm (listed by the maker).

What is the lug width of the modern Ploprof 1200M?

24 mm. Omega lists 24 mm between lugs for the steel 224.30.55.21.01.001 and for the 2023 Summer Blue 227.32.55.21.03.001. Delugs also lists 24 mm for the titanium 227.90.55.21.04.001.

Is the Summer Blue Ploprof smaller than the earlier 1200M?

Shorter and thinner, not narrower. Omega gives 55 x 45 mm and 15.50 mm for the Summer Blue, against 55 x 48 mm and 17.50 mm (steel, 2009) or 18.26 mm (titanium). Time and Tide notes that the 45 mm lug to lug is shorter than on the Seamaster 300 and 300M.

What bracelet or strap did each Ploprof 1200M come with?

The 2009 steel model came on a brushed Sharkproof mesh bracelet or on black or orange rubber. The titanium 227.90 versions come on a titanium mesh bracelet with an extra rubber strap in the box. The 2023 Summer Blue comes on a blue rubber strap with a steel pin buckle.

Did the 1970s Ploprof come on a bracelet or a strap?

Both appear in auction records: Christie's and Sotheby's catalogue 166.077 examples on Omega steel bracelets, and a 2016 Christie's lot came with an Omega Isofrane rubber strap. None of these lots states the lug width.

Other Omega collections

Help

What is lug width?

The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.

Measure it in 30 seconds

  1. Take the strap off, or look at the back of it: many straps print their width.
  2. Measure the inside gap between the lugs with a caliper or a millimetre ruler.
  3. Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.

Strap, quick release or system?

Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.