Revolution wrote that Patek Philippe introduced the calibre 215 PS in 1974 as a 10-ligne movement conceived as a successor to the 12-120. According to Revolution, the calibre 215 was designed with a distinct focus on improving chronometric performance, and at its launch it was the first calibre to have a Gyromax balance running at 4 Hz. WatchTime explained that PS stands for petite seconde, small seconds.
Patek Philippe's instruction manual lists the caliber 215 PS as a manually wound movement 21.90 mm in diameter and 2.55 mm high, with 130 parts and 18 jewels. The manual gives a Gyromax balance, a Spiromax balance spring and a frequency of 28,800 semi-oscillations per hour (4 Hz). Fully wound, Patek Philippe states that it runs for at least 44 hours. The seconds are shown on a subsidiary dial, and the movement carries the Patek Philippe Seal. The brand's 2006 press release for the Ref. 5119 listed the same caliber with a flat balance spring and the Geneva Seal.
Patek Philippe's own Calatrava chronology names the manually wound caliber 215 PS in the Ref. 3919 of 1985, the Ref. 5115 of 2000, the Ref. 5196 of 2004 and the Ref. 5119 of 2006. Monochrome Watches wrote in 2017 that the Ref. 5196 holds the hand-wound Caliber 215 PS, just 2.55mm thick and beating at 28,800vph. Revolution captioned the movement as powering a majority of modern Calatrava models. WatchTime, in its May/June 2022 issue, wrote that Patek Philippe equipped the Calatrava with the caliber 215 PS for many years, and noted that the newer caliber 30-255 PS has an overall diameter of 31 mm, compared to 21.9 mm for the 215 PS.
Illustration drawn to scale: 36 mm case, 20 mm lugs
No photo of the Patek Philippe calibre 215 PS yet. Do you own one?Share a photo
15 Patek Philippe calibre 215 PS references
Lug width
Case size
Patek Philippe calibre 215 PS references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.
5119G‑001
215 PS Calatrava
Lug width: 20 mm
Source: ListedAttachment: Spring bars
Case size: 36 mm · White dial · Case material: White Gold
Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.
No reference matches.
FAQ
What lug width does the Patek Philippe calibre 215 PS use?
Patek Philippe calibre 215 PS lug width: 16 to 21 mm depending on the reference. The most common is 20 mm (6 of the 15 references with a listed width in our database). Find your exact reference in the table below. These widths are listed in our database; the maker check is in progress.
Do all Patek Philippe calibre 215 PS references take the same strap?
No. 5 different lug widths appear across the line, often by case size or generation. Check the reference engraved on the case back or between the lugs.
Where do these Patek Philippe calibre 215 PS lug widths come from?
From our database, which lists 15 Patek Philippe calibre 215 PS references, 15 of them with a listed width. Each reference card says whether the maker lists the width, two independent sources agree on it, or it is not yet verified.
Be the first to share a photo of your Patek Philippe calibre 215 PS
Your own photo of your watch, on the wrist or on a strap. We check every photo before it appears, credited with the name you give.
Help
What is lug width?
The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.
Measure it in 30 seconds
Take the strap off, or look at the back of it: many straps print their width.
Measure the inside gap between the lugs with a caliper or a millimetre ruler.
Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.
Strap, quick release or system?
Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.