According to Patek Philippe's magazine, the Ref. 3940 debuted in 1985 and was equipped with the caliber 240 Q, a refinement of the caliber 240 that first appeared in 1977. The magazine describes that base movement as characterized by a 22K gold planetary microrotor countersunk into the movement. Phillips, cataloguing a Ref. 3940 from circa 1985 with the cal. 240 Q and 27 jewels, also writes that the reference was first released in 1985.
Patek Philippe lists the Caliber 240 Q as a self-winding perpetual calendar movement, 27.5 mm in diameter and 3.88 mm thick, with 275 parts and 27 jewels. It is wound by an off-center mini-rotor in 22K gold, and the manual specifies unidirectional winding. Day, date, month, leap year and a 24-hour indication are shown by hands, with moon phases in an aperture. The instruction manual explains that, with its 48-month cam, the perpetual calendar automatically takes into account months with 28, 29, 30 and 31 days. Patek Philippe lists it with a Gyromax balance and a Spiromax balance spring, a frequency of 21,600 semi-oscillations per hour and the Patek Philippe Seal.
Phillips writes that the production run of the Ref. 3940 only ceased in 2007. According to Patek Philippe's magazine, the 37.2 mm Ref. 5140, equipped with the caliber 240 Q, was originally launched in 2006 and returned to the dial layout of the Ref. 3940, replacing that model. The magazine adds that the ladies' Ref. 7140 followed in 2012 and that the cushion-cased Ref. 5940 also uses the 240 Q. Patek Philippe's product pages name the Caliber 240 Q for the Ref. 5327G-001 and the Ref. 7140G-001, calling it "the famous ultra-thin self-winding Caliber 240 Q".
Illustration drawn to scale: 37.2 mm case, 19 mm lugs
No photo of the Patek Philippe calibre 240 Q yet. Do you own one?Share a photo
16 Patek Philippe calibre 240 Q references
Lug width
Case size
Patek Philippe calibre 240 Q references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.
5140P‑017
240 Q Gondolo
Lug width: 19 mm
Source: ListedAttachment: Spring bars
Case size: 37.2 mm · Grey dial · Case material: Platinum
Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.
No reference matches.
FAQ
What lug width does the Patek Philippe calibre 240 Q use?
Patek Philippe calibre 240 Q lug width: 16 to 21 mm depending on the reference. The most common is 19 mm (7 of the 16 references with a listed width in our database). Find your exact reference in the table below. These widths are listed in our database; the maker check is in progress.
Do all Patek Philippe calibre 240 Q references take the same strap?
No. 6 different lug widths appear across the line, often by case size or generation. Check the reference engraved on the case back or between the lugs.
Where do these Patek Philippe calibre 240 Q lug widths come from?
From our database, which lists 16 Patek Philippe calibre 240 Q references, 16 of them with a listed width. Each reference card says whether the maker lists the width, two independent sources agree on it, or it is not yet verified.
Be the first to share a photo of your Patek Philippe calibre 240 Q
Your own photo of your watch, on the wrist or on a strap. We check every photo before it appears, credited with the name you give.
Help
What is lug width?
The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.
Measure it in 30 seconds
Take the strap off, or look at the back of it: many straps print their width.
Measure the inside gap between the lugs with a caliper or a millimetre ruler.
Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.
Strap, quick release or system?
Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.