According to Revolution, Patek Philippe introduced the Calatrava ref. 5296 in 2006, powered by the automatic calibre 324 SC, which it describes as a successor to the calibre 315. Revolution also writes that in the second series of the Nautilus 5711, from 2007 up until 2019, the cal. 315 S C was replaced with the cal. 324 SC.
Patek Philippe lists the calibre 324 S C as a self-winding movement 27 mm in diameter and 3.3 mm high, with 213 parts and 29 jewels. It is wound in one direction by a central rotor in 21K gold. It has a Gyromax balance and a Spiromax balance spring in Silinvar, and beats at 28,800 semi-oscillations per hour. According to Revolution, it uses an indirect central seconds without any additional gears, and the movement keeps a slim profile of 3.3 mm high.
In 2019 Patek Philippe unveiled the calibre 26-330, which it presents as an advanced iteration of the calibre 324. The calibre 324 S C was still fitted to the Calatrava Ref. 6007A, announced in June 2020, with an aperture date at 3 o'clock. According to SJX Watches, the first generation of the Calatrava ref. 5227 was powered by the cal. 324 S C and the later one by the cal. 26-330 S C, which evolved from it.
Illustration drawn to scale: 38 mm case, 20 mm lugs
No photo of the Patek Philippe calibre 324 S C yet. Do you own one?Share a photo
19 Patek Philippe calibre 324 S C references
Lug width
Case size
Patek Philippe calibre 324 S C references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.
5296R‑010
324 S C Calatrava
Lug width: 21 mm
Source: ListedAttachment: Spring bars
Case size: 38 mm · Silver dial · Case material: Rose Gold
Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.
No reference matches.
FAQ
What lug width does the Patek Philippe calibre 324 S C use?
Patek Philippe calibre 324 S C lug width: 19 to 22 mm depending on the reference. The most common is 20 mm (7 of the 19 references with a listed width in our database). Find your exact reference in the table below. These widths are listed in our database; the maker check is in progress.
Do all Patek Philippe calibre 324 S C references take the same strap?
No. 4 different lug widths appear across the line, often by case size or generation. Check the reference engraved on the case back or between the lugs.
Where do these Patek Philippe calibre 324 S C lug widths come from?
From our database, which lists 19 Patek Philippe calibre 324 S C references, 19 of them with a listed width. Each reference card says whether the maker lists the width, two independent sources agree on it, or it is not yet verified.
Be the first to share a photo of your Patek Philippe calibre 324 S C
Your own photo of your watch, on the wrist or on a strap. We check every photo before it appears, credited with the name you give.
Help
What is lug width?
The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.
Measure it in 30 seconds
Take the strap off, or look at the back of it: many straps print their width.
Measure the inside gap between the lugs with a caliper or a millimetre ruler.
Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.
Strap, quick release or system?
Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.