Patek Philippe's own historic review of its chronographs says the remaining stock of Valjoux blanks sustained production of the Ref. 2499 chronograph with perpetual calendar until 1985. An alternative was found at the ebauche maker Nouvelle Lemania SA, and in 1986 the reworked caliber CH 27-70 ticked for the first time in the Ref. 3970, a chronograph with perpetual calendar. Phillips names the movement of the Ref. 3970 as caliber CH 27-70 Q and describes it as Lemania-based. According to Monochrome Watches, the base is the Lemania 2310.
Patek Philippe writes that the CH 27-70 had the classic features of manual winding, column-wheel control and a horizontal clutch, and that the movement blank had to be totally reworked. The same review says the changes raised the power reserve by 20% to 60 hours, that the movement uses the Gyromax balance at 18,000 semi-oscillations per hour (2.5 Hz), and that it carries the Geneva Seal. For the perpetual calendar version, a Patek Philippe press release of April 2007 for the Ref. 5971 lists Caliber CH 27-70 Q with 353 parts and 24 jewels, a diameter of 30 mm and a height of 7.20 mm. That release also states that the base movement is made exclusively for Patek Philippe by Nouvelle Lemania.
From the Ref. 3970 to the Ref. 5970, then an in-house successor
According to Phillips, it is estimated that just over 4,000 examples of the Ref. 3970 were made before the reference was discontinued in 2004, the year the larger Ref. 5970 arrived. Sotheby's writes that the Ref. 5970 used the same CH 27-70 Q caliber in a 40 mm case. According to Monochrome Watches, the Ref. 5020 was powered by the same calibre, and the Ref. 5970 was the last Patek Philippe perpetual calendar chronograph to use it. In November 2009, Patek Philippe presented a new chronograph caliber and said it would gradually replace the Nouvelle Lemania-based caliber CH 27-70. Patek Philippe describes the movement of the Ref. 5270 as its first manufacture-made chronograph movement with a perpetual calendar, introduced in 2011.
Illustration drawn to scale: 36 mm case, 19 mm lugs
No photo of the Patek Philippe calibre CH 27-70 Q yet. Do you own one?Share a photo
18 Patek Philippe calibre CH 27-70 Q references
Lug width
Case size
Patek Philippe calibre CH 27-70 Q references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.
3970EG‑022
CH 27-70 Q Gondolo
Lug width: 19 mm
Source: ListedAttachment: Spring bars
Case size: 36 mm · Silver dial · Case material: White Gold
Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.
No reference matches.
FAQ
What lug width does the Patek Philippe calibre CH 27-70 Q use?
Patek Philippe calibre CH 27-70 Q lug width: 19 or 21 mm depending on the reference. The most common is 19 mm (10 of the 18 references with a listed width in our database). Find your exact reference in the table below. These widths are listed in our database; the maker check is in progress.
Do all Patek Philippe calibre CH 27-70 Q references take the same strap?
No. 2 different lug widths appear across the line, often by case size or generation. Check the reference engraved on the case back or between the lugs.
Where do these Patek Philippe calibre CH 27-70 Q lug widths come from?
From our database, which lists 18 Patek Philippe calibre CH 27-70 Q references, 18 of them with a listed width. Each reference card says whether the maker lists the width, two independent sources agree on it, or it is not yet verified.
Be the first to share a photo of your Patek Philippe calibre CH 27-70 Q
Your own photo of your watch, on the wrist or on a strap. We check every photo before it appears, credited with the name you give.
Help
What is lug width?
The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.
Measure it in 30 seconds
Take the strap off, or look at the back of it: many straps print their width.
Measure the inside gap between the lugs with a caliper or a millimetre ruler.
Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.
Strap, quick release or system?
Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.