Rolex Early Cushion

Every reference with a known width takes the same strap size. Your reference is engraved on the case back or between the lugs at 6 o'clock.

16 mm

Verification: Listed in our database

Attachment: spring bars

31 to 32 mm cases · 1930 to 1932

Indicative information. Check your watch before buying a strap: wristreet.com is not responsible for an incorrect size.

Watch line2 references
16 mm
Illustration drawn to scale: 32 mm case, 16 mm lugs

No photo of the Rolex Early Cushion yet. Do you own one?Share a photo

Lug widths across the line

The Rolex Early Cushion takes a 16 mm strap: all 2 references with a known width use 16 mm.

Filter references by lug width

The story · Since 1926

The story of the Rolex Early Cushion

When Rolex sealed a watch by screwing down its bezel, back and crown in 1926, the result came in square-ish shapes rather than round: an octagon or a cushion, roughly 32 mm across for men. Some cushion Oysters went to India, where jewellers in Bombay and Calcutta put their names on them.

32 mm

Men's size of the first cushion and octagonal Oysters (women's: 28 mm)

Read the full storyHide the story
32 mmMen's size of the first cushion and octagonal Oysters (women's: 28 mm)
4Patents stamped inside a circa 1927 cushion Oyster case (two British, two Swiss)
47 mmWidth of the cushion case Rolex made for Panerai's ref. 3646

Chapters

  1. 1926

    A case sealed like an oyster

    Rolex patented the Oyster case in 1926: the bezel, case back and winding crown all screwed down against the middle case to keep out water and dust. Hans Wilsdorf named it after the oyster, which can stay under water without harm to its parts.

  2. 1926 to late 1920s

    Cushion or octagon

    The first Oysters were not round. Charles Tearle of Antiquorum wrote that they came as a cushion or an octagon, 32 mm for men and 28 mm for women, with a serrated bezel and a large onion crown. Chronos says Wilsdorf quickly widened the range of cushion and octagonal cases in gold, silver and nickel-plated brass.

  3. Late 1920s

    Built for the tropics

    Tearle explains that waterproofing mattered most in regions such as India, where dust and humidity ruined ordinary watches. Surviving cushion Oysters carry the names of Indian retailers on the dial and list the British and Swiss Oyster patents inside the case back.

  4. Late 1920s to 1930s

    Gold, silver, chrome and steel

    (Late 1920s to 1930s) Gold, silver, chrome and steel: Cushion Oysters of the late 1920s and 1930s appear at auction in 9ct gold, silver, chromed and stainless steel, often with Glasgow import hallmarks for the British market. Christie's records a 9ct gold ref. 2416 of 1936 with fixed lugs, and a stainless steel Oyster Imperial ref. 2081 of circa 1930.

  5. Late 1930s to 1940s

    The cushion grows for Panerai

    Around 1938 Rolex began making the ref. 3646 for Panerai and the Italian Navy: a 47 mm cushion case with soldered curved wire lugs and an onion crown. aBlogtoWatch traces the Panerai shape back to the cushion case of the original Oyster, which Rolex enlarged.

Moments

2018. A Rolex-made ref. 3646 for Panerai, with its 47 mm cushion case, sold for USD 50,000 at Christie's on 6 December 2018.

2008. An 18k gold cushion Oyster of circa 1927, retailed by J. Boseck & Co. of Calcutta, sold for US$5,100 including premium at Bonhams New York on 19 June 2008.

1989. Antiquorum sold an 18ct gold Oyster Perpetual Chronometer ref. 2483/3458 from the 1930s for JPY 556,250 in Tokyo on 15 December 1989.

Generations and strap changes

  1. circa 1927
    Cushion Oyster, case no. 24098

    Cushion Oyster, case no. 24098: 18k gold three-piece cushion case with serrated bezel and back, screw-down Patent Oyster crown and Extra Prima movement, retailed in Calcutta. The inner case is stamped with two British and two Swiss patent numbers.

    31 mm wide, wire lugs, on a leather strap.

  2. 1927
    9ct gold cushion Oyster, Glasgow 1927

    9ct gold cushion Oyster case marked RWC Ltd with Glasgow import marks for 1927, 15-jewel Extra Prima movement and silvered Arabic dial.

    32 mm case with wire lugs on a black leather strap.

  3. circa 1930
    Ref. 2081 Oyster Imperial

    Stainless steel cushion-shaped Oyster Imperial with screw back, screw-down crown, black dial and a 17-jewel 10 1/2 ligne manual movement.

    32 mm case, catalogued on an unsigned black leather strap.

  4. 1930s
    Ref. 2483/3458 Oyster Perpetual

    Antiquorum catalogued an 18ct gold Oyster Perpetual Chronometer stamped ref. 2483/3458, self-winding, with a waterproof screwed back and graduated bezel. It described the case as tonneau shaped, not cushion.

    32 mm case.

  5. 1936
    Ref. 2416

    9ct gold cushion-shaped Oyster with silvered dial, gilt Arabic numerals and a 15-jewel movement, with Glasgow import marks for 1936.

    27 mm case with fixed lugs.

2 Rolex Early Cushion references

Rolex Early Cushion references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.

  • 2483

    Early Cushion Oyster

    Lug width: 16 mm

    Source: Listed Attachment: Spring bars

    Case size: 32 mmYear: 1930White dialCase material: Steel

    Attachment
    classic lugs
    Movement
    Manual
    Caseback
    Screw-down steel
    Production
    1930-1936
    Status
    Listed in our database, not yet verified
  • 2498

    Early Cushion

    Lug width: 16 mm

    Source: Listed Attachment: Spring bars

    Case size: 31 mmYear: 1932White dialCase material: Steel

    Attachment
    classic lugs
    Movement
    Manual
    Caseback
    Screw-down steel
    Production
    1932-1938
    Status
    Listed in our database, not yet verified

Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.

FAQ

What lug width does the Rolex Early Cushion use?

The Rolex Early Cushion takes a 16 mm strap: all 2 references with a known width use 16 mm. These widths are listed in our database; the maker check is in progress.

How big is an early Rolex cushion Oyster?

Tearle gives 32 mm for men's and 28 mm for women's models. Auction catalogues of cushion Oysters record 31 to 32 mm cases for most examples and 27 mm for a 1936 ref. 2416.

Do cushion Oysters have spring bars?

The catalogues describe wire lugs or fixed lugs that are part of the case, not removable spring bars. The strap therefore has to pass around the fixed bar of the lug.

Was the Oyster Mercedes Gleitze carried in 1927 a cushion?

Not according to Charles Tearle of Antiquorum, who writes that Rolex advertised her swim with a ladies' octagonal Oyster. Rolex's own pages confirm the 1927 Channel swim with an Oyster but do not give its shape.

Other Rolex collections

Help

What is lug width?

The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.

Measure it in 30 seconds

  1. Take the strap off, or look at the back of it: many straps print their width.
  2. Measure the inside gap between the lugs with a caliper or a millimetre ruler.
  3. Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.

Strap, quick release or system?

Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.