Rolex Early Single-Button Chronograph

Rolex Early Single-Button Chronograph strap sizes, reference by reference.

Indicative information. Check your watch before buying a strap: wristreet.com is not responsible for an incorrect size.

Watch line2 references
Illustration drawn to scale: 40 mm case, lug width not on record

No photo of the Rolex Early Single-Button Chronograph yet. Do you own one?Share a photo

The story · Since 1939

The story of the Rolex Early Single-Button Chronograph

Years before the Daytona, Rolex timed events with a single button: an oval pusher on the case band of the big gold ref. 2021, or a pusher hidden inside the crown of the cushion-shaped ref. 2022. Christie's calls the 2021 one of Rolex's earliest chronographs ever made, and Phillips had sold only two cushion-cased Rolex chronographs by 2023.

40 mm

Diameter of the gold ref. 2021, which Antiquorum calls oversize

Read the full storyHide the story
40 mmDiameter of the gold ref. 2021, which Antiquorum calls oversize
CHF 57,500Paid at Phillips in 2018 for ref. 2021, case 12'010
2Cushion-shaped Rolex chronographs sold by Phillips as of 2023
32 mmWidth of the cushion case of ref. 2022

Chapters

  1. 1920s

    Rolex's first stopwatch on the wrist

    Phillips writes that ref. 2021 was first launched in the 1920s and ranks it among Rolex's earliest chronograph models. Christie's describes the same features expected of a 1920s chronograph: a hinged case, an enamel dial and a single button. On these watches one button handles start, stop and return to zero.

  2. 1920s to 1930s

    A big gold hinged case

    The ref. 2021 came in a large round case of 39 to 40 mm with a hinged back and an olive-shaped pusher. Its enamel dial carries a telemeter scale around the edge and a spiral tachymeter in the centre, printed in red. Phillips notes that the size makes it look contemporary today.

  3. 1920s to 1930s

    Cushion cases, button in crown

    Rolex also built cushion-shaped single-button chronographs, a case style Phillips says was in fashion in the 1920s and 1930s. On the ref. 2022 the onion crown doubles as the chronograph pusher. The ref. 2057, made for the French market, has the same cushion shape with a two-tone pulsations dial.

  4. Mid-1930s

    Two pushers replace one

    In the mid-1930s Rolex introduced ref. 2508, its first chronograph with two pushers and two registers. Early examples kept olive-shaped pushers in a case of about 37 mm, later ones moved to rectangular pushers and a slightly smaller case.

  5. 1939

    The chronograph becomes an Oyster

    The early single-button watches had non-waterproof cases. Christie's writes that Rolex only brought its Oyster design to chronographs in the 1930s, and Phillips names ref. 3525, launched in 1939, as the first Rolex chronograph in an Oyster case with screw-down back and crown.

Moments

2024. Antiquorum sold a 40 mm gold ref. 2021 with white enamel dial, case 13368, for HKD 237,500 in Hong Kong on 1 June 2024.

2023. An 18K gold ref. 2022, case 12043, sold for CHF 38,100 at The Geneva Watch Auction: XVIII (3 and 4 November 2023), estimate CHF 10,000 to 20,000. Phillips said it was only the second cushion-shaped Rolex chronograph it had sold.

2018. Gold ref. 2021, case 12'010, with enamel dial sold for CHF 57,500 at The Geneva Watch Auction: SEVEN, against an estimate of CHF 25,000 to 40,000. The same case had sold for CHF 43,750 at Phillips' Geneva Watch Auction: THREE.

2004. At Antiquorum's sale celebrating its 30th anniversary in Geneva on 24 April 2004, a gold ref. 2022 with champagne dial sold for CHF 12,075.

Generations and strap changes

  1. circa 1930
    Ref. 1219

    Stainless steel cushion-shaped single-button chronograph with Breguet numerals and blue telemeter and red tachymeter scales; the button sits in the crown. Christie's calls it extremely rare in preserved original condition.

    33 mm wide case with wire lugs and snap-on back.

  2. circa 1938
    Ref. 2057

    Yellow gold cushion-shaped single-button chronograph made for the French market, with a two-tone pulsations dial, Breguet numerals and a Rolex France mark on the back. Phillips believed it was the first of its kind to reach auction.

    Cushion case 32 mm wide, catalogued on leather.

  3. Mid-1930s
    Ref. 2508 (successor)

    The two-pusher, two-register chronograph that followed the single-button watches. First-series cases measure about 37 mm with olive pushers; second-series cases are slightly smaller with rectangular pushers.

    Phillips notes most 2508s were born with soldered fixed bars, later removed on nearly all of them.

2 Rolex Early Single-Button Chronograph references

Rolex Early Single-Button Chronograph references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.

  • 2021

    Early Single-Button Chronograph ref.

    Lug width: Width not listed yet

    Source: Listed

    Case size: 40 mmYear: 1936Silver dialCase material: 18K Yellow Gold

    Style
    chrono
    Movement
    Manual Chronograph
    Caseback
    Screw-down steel
    Production
    1936-1940
    Status
    Listed in our database, not yet verified
  • 2022

    Early Single-Button Chronograph Cushion single-button chronograph ref.

    Lug width: Width not listed yet

    Source: Listed

    Case size: 33 mmCream dialCase material: Variant-dependent: steel, silver or 18K yellow gold

    Style
    chrono
    Movement
    Manual Chronograph
    Caseback
    Screw-down steel
    Production
    1937-1942
    Status
    Listed in our database, not yet verified

Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.

FAQ

What lug width does the Rolex ref. 2021 or ref. 2022 take?

None of the auction catalogues consulted states a lug width for either reference. They give case sizes instead: 39 or 40 mm round for the 2021, and a 32 mm wide cushion for the 2022. Measure the gap between the lugs of the watch itself before ordering a strap.

Does the ref. 2022 use spring bars?

Bonhams describes a gold ref. 2022 with fixed wire lugs, so on that example the strap has to pass around a bar that does not come out. Christie's also lists wire lugs on the related cushion monopusher ref. 1219.

What strap did these chronographs come on?

Catalogued examples sit on leather: a leather strap with pin buckle on the Phillips ref. 2021, a leather strap with an 18K gold Rolex buckle on the Antiquorum ref. 2021, and alligator with an 18K gold Rolex pin buckle on the Phillips ref. 2022.

Are these early chronographs water resistant Oysters?

No. Phillips describes the ref. 2021 as having a non-waterproof hinged case, and a Bonhams ref. 2022 has a snap-on back. Rolex's first Oyster chronograph, according to Phillips, was ref. 3525 of 1939.

Other Rolex collections

Help

What is lug width?

The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.

Measure it in 30 seconds

  1. Take the strap off, or look at the back of it: many straps print their width.
  2. Measure the inside gap between the lugs with a caliper or a millimetre ruler.
  3. Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.

Strap, quick release or system?

Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.