Studio Underd0g 01 Series

Every reference with a known width takes the same strap size. Your reference is engraved on the case back or between the lugs at 6 o'clock.

20 mm

Verification: Verified by the maker for ref. 01DST, 01GPB and 2 more

Attachment: spring bars

38.5 mm case

Indicative information. Check your watch before buying a strap: wristreet.com is not responsible for an incorrect size.

Watch line7 references
20 mm
Illustration drawn to scale: 38.5 mm case, 20 mm lugs

No photo of the Studio Underd0g 01 Series yet. Do you own one? Share a photo

Lug widths across the line

The Studio Underd0g 01 Series takes a 20 mm strap: all 7 references with a known width use 20 mm.

Filter references by lug width

The story · Since 2021

The story of the Studio Underd0g 01 Series

The Watermel0n, a hand-wound chronograph whose pink and green dial looks like the fruit, is the watch that put Studio Underd0g on the map. Richard Benc drew the first designs during the 2020 lockdown, and the first run of watches sold out.

38.5 mm

case diameter, the same on every generation of the 01 Series

Read the full storyHide the story
38.5 mmcase diameter, the same on every generation of the 01 Series
20 mmlug width, tapering to 16 mm at the clasp, as stated by the maker and two reviews
10,000 piecesminimum order Seagull set for ST-19 chronograph movements from 1 May 2024

Chapters

  1. 2021 to 2022

    The first run sells out

    The launch line-up was a trio in Worn & Wound's review, priced at $450.

  2. 2023

    Epsom straps and British checks

    Time+Tide began stocking the full collection in May 2023 and described the second generation as the first generation improved with hand-made Epsom calfskin straps. The watches were assembled in Britain, with quality control carried out by Horologium.

  3. 2024

    An exclusive Seagull movement

    Seagull set a minimum order of 10,000 pieces for its ST-19 chronograph movement from 1 May 2024, a level most micro-brands cannot reach. Studio Underd0g secured its own ST-1901B under contract and opened the third generation to pre-orders on 19 November 2024.

  4. 2025

    Hard to buy at list price

    In April 2025 T3 described the brand's watches as hard to get without paying inflated prices. Its reviewer waited about four months after a pre-order to receive a 01 Series.

Moments

2024. After Seagull's minimum order rule took effect, Studio Underd0g secured a bespoke ST-1901B, which Monochrome says is made under contract with Seagull. The third generation of the 01 Series was the first to use it.

2022. Hodinkee reported in January 2022 that Benc's first run of colourful designs had completely sold out, and that buyers ordered from the UK, US, Middle East and Asia. The sell-out is the moment the brand's demand became visible.

Designed by

Richard Bencdesigner2020

Benc, a designer who worked on product development at Braun, drew the 01 Series designs during the 2020 lockdown and founded the brand. Hodinkee calls him the London-based designer who posted his designs online.

Generations and strap changes

  1. 2024
    Third generation: ST-1901B and 12.9 mm case

    The third generation has a 12.9 mm case, down from 13.6 mm, and an exclusive ST-1901B with a black mainplate and swan neck regulator. The dial now reads Assembled in Great Britain, and the rating is -10/+15 seconds per day in place of -15/+35.

    [object Object]

  2. 2023
    Second generation: hand-made Epsom straps

    Time+Tide describes the second generation as the first generation improved with hand-made Epsom calfskin straps and British assembly and quality control by Horologium.

    [object Object]

  3. 2021
    First generation: Watermel0n, Desert Sky and Go0fy Panda

    The first watches are 38.5 mm across with 44.5 mm lug to lug and 13.6 mm thickness, and carry the hand-wound Seagull ST-1901 chronograph with a display back. Worn & Wound reviewed the trio at $450.

    [object Object]

7 Studio Underd0g 01 Series references

Studio Underd0g 01 Series references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.

  • ST‑1901B

    01 Series (Gen3)

    Lug width: 20 mm

    Source: Listed Attachment: Spring bars

    Case size: 38.5 mmGrey dial

    Attachment
    classic lugs
    Status
    Listed in our database, not yet verified
  • 01AVB

    01 Series Av0cado (Gen3)

    Lug width: 20 mm

    Source: Listed Attachment: Spring bars

    Case size: 38.5 mmMulti dial

    Attachment
    classic lugs
    Status
    Listed in our database, not yet verified
  • 01DST

    01 Series Desert Sky (Gen3)

    Lug width: 20 mm

    Source: Verified, maker Attachment: Spring bars

    Case size: 38.5 mmCase material: 316L Stainless Steel

    Attachment
    classic lugs
  • 01GPB

    01 Series Go0fy Panda (Gen3)

    Lug width: 20 mm

    Source: Verified, maker Attachment: Spring bars

    Case size: 38.5 mmCase material: 316L Stainless Steel

    Attachment
    classic lugs
  • 01GUFG

    01 Series Guacam0le (Gen3)

    Lug width: 20 mm

    Source: Listed Attachment: Spring bars

    Case size: 38.5 mmGreen dial

    Attachment
    classic lugs
    Status
    Listed in our database, not yet verified
  • 01MCBR

    01 Series Mint Ch0c Chip (Gen3)

    Lug width: 20 mm

    Source: Verified, maker Attachment: Spring bars

    Case size: 38.5 mmMulti dialCase material: 316L Stainless Steel

    Attachment
    classic lugs
  • 01WMB

    01 Series Watermel0n (Gen3)

    Lug width: 20 mm

    Source: Verified, maker Attachment: Spring bars

    Case size: 38.5 mmCase material: 316L Stainless Steel

    Attachment
    classic lugs

Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.

FAQ

What lug width does the Studio Underd0g 01 Series use?

The Studio Underd0g 01 Series takes a 20 mm strap: all 7 references with a known width use 20 mm. The Studio Underd0g 01 Series ref. 01DST, 01GPB and 2 more take 20 mm (listed by the maker).

What lug width does the 01 Series take?

20 mm at the lugs, tapering to 16 mm at the clasp. The maker's Gen 3 page, Worn & Wound's 2021 review and Time+Tide's Gen 3 table all give 20 mm.

How long is the case lug to lug?

44.5 mm, according to the maker's page, Time+Tide's 2024 table and Worn & Wound's 2021 review. T3's 2025 review gives 45.5 mm, which is recorded as a divergence.

Can the watch be worn in water?

The maker rates the Gen 3 at 5 ATM, and Time+Tide lists 50 m. T3's reviewer found it survives a splash but is not built for diving, because it has no screw-down crown or pushers.

Other Studio Underd0g collections

Help

What is lug width?

The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.

Measure it in 30 seconds

  1. Take the strap off, or look at the back of it: many straps print their width.
  2. Measure the inside gap between the lugs with a caliper or a millimetre ruler.
  3. Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.

Strap, quick release or system?

Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.