Zenith describes the El Primero 400 as the most faithful descendant of the original El Primero 3019 PHC introduced in 1969. According to Monochrome Watches, Zenith unveiled the 3019 PHC on January 10th, 1969, and decided to halt the production of mechanical movements in 1975. The same outlet credits Charles Vermot, a Zenith workshop manager, with disobeying orders to sell the presses and tools as scrap. Monochrome writes that several improvements had been made by 1987, including an upgraded shock protection system, and that this enhanced version was designated calibre 400. An earlier Monochrome article likewise ties the reference 400 to the re-industrialisation of the movement in 1987.
Zenith states that the El Primero 400 is entirely developed and manufactured in-house and operates at a frequency of 5 Hz, or 36,000 vibrations per hour, enabling measurement to 1/10th of a second. The brand lists it as an automatic El Primero column-wheel chronograph movement. Zenith gives it a 50-hour power reserve and 278 components, and its press sheet for the El Primero A384 Revival lists 31 jewels. On the A384 the calibre shows hours and minutes in the centre, small seconds at 9 o'clock and a date at 4:30, with a 30-minute counter at 3 o'clock and a 12-hour counter at 6 o'clock.
According to Monochrome Watches, the calibre 400 remained unchanged for a decade until the introduction of the 400Z and 410Z in 1998. Zenith's press sheet for the El Primero A384 Revival, a remake of the 1969 reference A384, says the watch houses the latest version of the El Primero 400 chronograph movement. SJX Watches describes the El Primero 400 in that watch as a modernised version of the original El Primero 3019 PHC. Zenith also fits the calibre to the Chronomaster Revival Liberty II, where it calls it a direct descendant of the 1969 movement, and to the Defy Chronograph USM.
Illustration drawn to scale: 37 mm case, 19 mm lugs
No photo of the Zenith calibre El Primero 400 yet. Do you own one?Share a photo
16 Zenith calibre El Primero 400 references
Lug width
Case size
Zenith calibre El Primero 400 references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.
03.A384.400/21.M384
El Primero 400 50th el primero anniversary el primero a384 revival bracelet
Lug width: 20 mm
Source: ListedAttachment: Spring bars
Case size: 37 mm · Year: 2020 · White dial · Case material: Stainless steel
Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.
No reference matches.
FAQ
What lug width does the Zenith calibre El Primero 400 use?
Zenith calibre El Primero 400 lug width: 18 to 20 mm depending on the reference. The most common is 19 mm (10 of the 16 references with a listed width in our database). Find your exact reference in the table below. These widths are listed in our database; the maker check is in progress.
Do all Zenith calibre El Primero 400 references take the same strap?
No. 3 different lug widths appear across the line, often by case size or generation. Check the reference engraved on the case back or between the lugs.
Where do these Zenith calibre El Primero 400 lug widths come from?
From our database, which lists 16 Zenith calibre El Primero 400 references, 16 of them with a listed width. Each reference card says whether the maker lists the width, two independent sources agree on it, or it is not yet verified.
Be the first to share a photo of your Zenith calibre El Primero 400
Your own photo of your watch, on the wrist or on a strap. We check every photo before it appears, credited with the name you give.
Help
What is lug width?
The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.
Measure it in 30 seconds
Take the strap off, or look at the back of it: many straps print their width.
Measure the inside gap between the lugs with a caliper or a millimetre ruler.
Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.
Strap, quick release or system?
Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.