TAG Heuer Calibre 36: watches and lug widths

Widths differ across this line. Enter or pick your exact reference to get its width.

Families with this calibre: Monaco, Link, Monza, Aquaracer

20 to 22.5 mm

Verification: Listed in our database

Attachment: spring bars or to verify, depending on the reference

38 to 40.5 mm cases

Pick your reference

Filter references by lug width
Find your exact reference

Widths checked against two independent sources or our database. How we verify

Report an error

Indicative information. Check your watch before buying a strap: wristreet.com is not responsible for an incorrect size.

Calibre6 references
22.5 mm
Illustration drawn to scale: 40.5 mm case, 22.5 mm lugs

No photo of the TAG Heuer Calibre 36 yet. Do you own one? Share a photo

6 TAG Heuer Calibre 36 references

  • CAL5111

    Calibre 36 Monaco

    Lug width: 22.5 mm

    Source: Listed Attachment: Spring bars

    Case size: 40.5 mmBlue dial

    Water resistance
    10 bar
    Calibre
    Calibre 36
    Attachment
    classic lugs
    Production
    2011-2015
    Status
    Listed in our database, not yet verified
  • CAL5113

    Calibre 36 Monaco

    Lug width: 22.5 mm

    Source: Listed Attachment: To verify

    Case size: 40.5 mmBlack dial

    Water resistance
    10 bar
    Calibre
    Calibre 36
    Production
    2013-2015
    Status
    Listed in our database, not yet verified
  • CAL5111.FC6299

    Calibre 36 Monaco 24 McQueen (Blue/Navy Dial)

    Lug width: 22 mm

    Source: Listed Attachment: Spring bars

    Case size: 40.5 mmBlue dial

    Water resistance
    10 bar
    Calibre
    Calibre 36
    Attachment
    classic lugs
    Production
    2011-2015
    Status
    Listed in our database, not yet verified
  • CR5112

    Calibre 36 Monza

    Lug width: 20 mm

    Source: Listed Attachment: Spring bars

    Case size: 38 mmWhite dial

    Water resistance
    5 bar
    Calibre
    Calibre 36
    Attachment
    classic lugs
    Status
    Listed in our database, not yet verified

Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.

FAQ

What lug width does the TAG Heuer Calibre 36 use?

TAG Heuer Calibre 36 lug width: 20 to 22.5 mm depending on the reference. The most common is 22.5 mm (2 of the 4 references with a listed width in our database). Find your exact reference in the table below. These widths are listed in our database; the maker check is in progress.

Do all TAG Heuer Calibre 36 references take the same strap?

No. 3 different lug widths appear across the line, often by case size or generation. Check the reference engraved on the case back or between the lugs.

Where do these TAG Heuer Calibre 36 lug widths come from?

From our database, which lists 6 TAG Heuer Calibre 36 references, 4 of them with a listed width. Each reference card says whether the maker lists the width, two independent sources agree on it, or it is not yet verified.

Other TAG Heuer collections

Help

What is lug width?

The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.

Measure it in 30 seconds

  1. Take the strap off, or look at the back of it: many straps print their width.
  2. Measure the inside gap between the lugs with a caliper or a millimetre ruler.
  3. Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.

Strap, quick release or system?

Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.