Calibre 5 is the name TAG Heuer gives to the ETA 2824, found in its Carrera and Aquaracer references. TAG Heuer notes that the automatic 4000 Series, a range introduced in 1991, already ran on an ETA 2824, the same movement later used as the Calibre 5. More recent versions of the Calibre 5 are based on the Sellita SW200.
The Calibre 5 is an automatic movement that shows hours, minutes, seconds and the date. TAG Heuer gives it a balance frequency of 4 Hz and a power reserve of 38 hours. WatchTime describes it as robust and reliable, and notes that the 38-hour reserve reflects older technology from the 1970s.
TAG Heuer lists a Link Calibre 5 three-hand watch among the changes made to the Link collection in 2007. In 2014 the Aquaracer Calibre 5 was the first model to introduce the new shape of the fourth generation Aquaracer 300m, which brought a new bezel design with flat edges. In the 2021 Aquaracer Professional 300, Monochrome describes the Calibre 5 as based on the Sellita SW200-1 architecture. In the Autavia Calibre 5, WatchTime reports that the movement, based on the Sellita SW200, is chronometer-certified before it is cased.
Illustration drawn to scale: 41 mm case, 20 mm lugs
No photo of the TAG Heuer Calibre 5 yet. Do you own one?Share a photo
51 TAG Heuer Calibre 5 references
TAG Heuer Calibre 5 references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.
Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.
No reference matches.
FAQ
What lug width does the TAG Heuer Calibre 5 use?
TAG Heuer Calibre 5 lug width: 17 to 22 mm depending on the reference. The most common is 20 mm (19 of the 51 references with a listed width in our database). Find your exact reference in the table below. The TAG Heuer Calibre 5 ref. WBP231R.BA0618, WBP231C.BA0626 and 1 more take 17.4 mm (listed by the maker).
Do all TAG Heuer Calibre 5 references take the same strap?
No. 10 different lug widths appear across the line, often by case size or generation. Check the reference engraved on the case back or between the lugs.
Where do these TAG Heuer Calibre 5 lug widths come from?
From our database, which lists 51 TAG Heuer Calibre 5 references, 51 of them with a listed width. Each reference card says whether the maker lists the width, two independent sources agree on it, or it is not yet verified.
Be the first to share a photo of your TAG Heuer Calibre 5
Your own photo of your watch, on the wrist or on a strap. We check every photo before it appears, credited with the name you give.
Help
What is lug width?
The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.
Measure it in 30 seconds
Take the strap off, or look at the back of it: many straps print their width.
Measure the inside gap between the lugs with a caliper or a millimetre ruler.
Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.
Strap, quick release or system?
Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.